The Steps to implement a rooftop garden:
The portable-modular method is a global standard method. By using the portable-modular method of “International GreenCheck company”, the minimum probable damage (even 0%) happens to your roof surface and insulation. This method has no connection to the surface of the roof. On the other hand, it has a high implementation speed in comparison with other methods, since the products and parts are totally pre-made. Implementation of the rooftop garden in a portable-modular way is a method that can be installed on any roof and balcony without the need for infrastructure. In this method, prefabricated parts are used with a variety of vegetation, including cover plants and all kinds of shrubs. Since all the facilities and equipment of the roofgarden in the “Green Check” method are portable and do not have any connection to the roof surface, therefore the weight caused by them is considered a live load (opposite to the dead load).
By converting all roof loads into live loads, “International Green Check company” has eliminated all structural problems caused by loads even for existing buildings. The company believes that all roofs are eligible to be converted into roof gardens. According to some regulations, the minimum live load for flat and low-slope roofs is 51 kg per m2.
Since items produced by “International Green Check company” in saturated state (when the soil is fully wet) have a maximum weight of 50 kg per m2, they will not cause any structural problems. Also, all the items are prefabricated in the “International Green Check company” ‘s workshop, and the installation and implementation of the green roof is done by the “International Green Check company” executive and specialized team in the shortest possible time at the project site. Also, due to the portability of all the items, it is possible to implement the green roof by “International Green Check company” ‘s method is possible in all parts of the country.
implement a rooftop garden
First Step: Visiting and roof garden design:
During your initial contact with the company, you will firstly connect with one of the project managers of “International Green Check company”, and after providing basic project information and full and comprehensive guidance by “Green Check” experts, an appointment will be set to visit your project.
If there is not possibility to visit the project, the information of the project will be received via the Internet and full consultation will be passed virtually and by phone.
During the initial visit, the exact dimensions of the project and pictures of the current situation will be carefully taken by our experts, and a comprehensive catalog will be provided with detailed explanations about the implementation and design process and the price calculation will be provided to you accordingly.
After the design contract is signed, 2 to 3 roof alternatives of designs will be presented along with a proforma invoice for your service, and during the design presentation, the required changes and editing will be applied to the initial alternatives to achieve the ideal and final design.
Since the planting beds are made of galvanized sheet with lasting powder paint, and geotextile and geo-drain layers are used inside the boxes, That is why there is no need for extra substructure before the implementation of the roof garden. In fact, the standard existent insulation layer(s) is enough for us, but for a 100% confidence for preventing damages to the roof, A three-centimeter layer of cement-sand mortar will be applied (in some cases) and that is sufficient so that we can start our work.
Please kindly note there is no need to worry about moisture and such problems for the topmost floor, because we do not have any connection to the roof surface, and as a result, the possibility of damage to the insulation is minimized. Creating planter beds using the portable-modular method, in fact, includes placing a number of planting trays (which is called planter boxes) and plants will be planted inside it.
implement a rooftop garden
Implementation price:
One of the most important topics that are discussed in the initial meetings is how to calculate the price of implementing a roof garden.
It is worth mentioning that in order to create comfort and convenience for our clients, we prepare and present a price list seasonally according to the products produced by “International Green Check factory”, which you can see in the image below. As you contact the company, the price list and service catalog will be sent to you immediately.
In the price list, all the items that will be used in your project are clearly priced. In the price list, you can see:
- a) products list
- b) The exact dimensions of the products
- c) The products’ photos
- d) A detailed description for all the products.
After the initial visit in your project site, the design of 2 to 3 designs will be prepared for the initial presentation. Each of these alternatives will be presented to you along with the relevant proforma invoice separately. The price for every item will be exactly calculated, that is why we are famous for being clear in presenting the price and conditions before any implementation, meaning you will sign a contract with all included necessary items with clear prices, and no more money will be received during your payments, except you want to change some parts of the design during the implementation step. So any edit in design will change (increase or decrease) the related prices.
Second step: Roof Insulation:
A prerequisite for implementation of roof garden in portable-modular method
If you haven’t encountered any problems with the insulation of your roof, you will not have any problems with the implementation of Roof Garden by “International Green Check company” and your roof is ready to be delivered to our executive team.
The only important thing left is to cover the roof insulation with a layer of cement sand mortar or mosaic just for the reason that a sharp object may hit the insulation during the implementation process.
Third step: production and transportation of items:
The advantage of the portable-modular system by “International Green Check company” is that a high percentage of the implementation work has already been done in the company’s factory and will be delivered to the implementation project in a prefabricated form.
With our method, the implementation speed reaches its maximum. The items and products are delivered to the project site in a semi-ready form and are implemented on site with the least hassle and the highest speed.
implement a rooftop garden
implement a rooftop garden
Materials of “GreenCheckco” products:
The material used in “Green Check” products is generally galvanized sheet with furnace powder paint and metal profile, which finally will be finished with a cover of wood plastic composite or thermowood, according to your choice.
Due to the higher durability and more affordable price, we emphasize the use of wood plastic composite (wpc). This material is actually a composite consisting of wood shavings combined with plastic, it is worth mentioning that wood plastic material is completely compatible with the environment.
Green Check Company is proud to introduce you its exclusive wood plastic composite production line.
In the production of wpc by of Green Check Company, no trees are cut and no plastic is produced, and the raw materials used for the production of wpc are totally from recycled materials.
Fourth step: implementation of structures:
After the products and raw materials are delivered to the project site, the structures are implemented at site for example, gazebos, pergola, atrium and the customized flower boxes. Then, the flooring (decking) process starts and in the next stage, the arrangement of ready items, and installation of artificial grass will be applied. And finally, sand and decorative stones are placed in the designated place according to the agreed design.
The Steps to implement a rooftop garden:
The portable-modular method is a global standard method. By using the portable-modular method of “International Green Check company”, the minimum probable damage (even 0%) happens to your roof surface and insulation. This method has no connection to the surface of the roof. On the other hand, it has a high implementation speed in comparison with other methods, since the products and parts are totally pre-made. Implementation of the rooftop garden in a portable-modular way is a method that can be installed on any roof and balcony without the need for infrastructure. In this method, prefabricated parts are used with a variety of vegetation, including cover plants and all kinds of shrubs. Since all the facilities and equipment of the green roof in the “Green Check” method are portable and do not have any connection to the roof surface, therefore the weight caused by them is considered a live load (opposite to the dead load).
By converting all roof loads into live loads, “International Green Check company” has eliminated all structural problems caused by loads even for existing buildings. The company believes that all roofs are eligible to be converted into roof gardens. According to some regulations, the minimum live load for flat and low-slope roofs is 51 kg per m2.
Since items produced by “International Green Check company” in saturated state (when the soil is fully wet) have a maximum weight of 50 kg per m2, they will not cause any structural problems. Also, all the items are prefabricated in the “International Green Check company” ‘s workshop, and the installation and implementation of the green roof is done by the “International Green Check company” executive and specialized team in the shortest possible time at the project site. Also, due to the portability of all the items, it is possible to implement the green roof by “International Green Check company” ‘s method is possible in all parts of the country.
First Step: Visiting and roof garden design:
During your initial contact with the company, you will firstly connect with one of the project managers of “International Green Check company”, and after providing basic project information and full and comprehensive guidance by “Green Check” experts, an appointment will be set to visit your project.
If there is not possibility to visit the project, the information of the project will be received via the Internet and full consultation will be passed virtually and by phone.
During the initial visit, the exact dimensions of the project and pictures of the current situation will be carefully taken by our experts, and a comprehensive catalog will be provided with detailed explanations about the implementation and design process and the price calculation will be provided to you accordingly.
After the design contract is signed, 2 to 3 roof alternatives of designs will be presented along with a proforma invoice for your service, and during the design presentation, the required changes and editing will be applied to the initial alternatives to achieve the ideal and final design.
Since the planting beds are made of galvanized sheet with lasting powder paint, and geotextile and geo-drain layers are used inside the boxes, That is why there is no need for extra substructure before the implementation of the roof garden. In fact, the standard existent insulation layer(s) is enough for us, but for a 100% confidence for preventing damages to the roof, A three-centimeter layer of cement-sand mortar will be applied (in some cases) and that is sufficient so that we can start our work.
Please kindly note there is no need to worry about moisture and such problems for the topmost floor, because we do not have any connection to the roof surface, and as a result, the possibility of damage to the insulation is minimized. Creating planter beds using the portable-modular method, in fact, includes placing a number of planting trays (which is called planter boxes) and plants will be planted inside it.
Implementation price:
One of the most important topics that are discussed in the initial meetings is how to calculate the price of implementing a roof garden.
It is worth mentioning that in order to create comfort and convenience for our clients, we prepare and present a price list seasonally according to the products produced by “International Green Check factory”, which you can see in the image below. As you contact the company, the price list and service catalog will be sent to you immediately.
In the price list, all the items that will be used in your project are clearly priced. In the price list, you can see:
- a) products list
- b) The exact dimensions of the products
- c) The products’ photos
- d) A detailed description for all the products.
After the initial visit in your project site, the design of 2 to 3 designs will be prepared for the initial presentation. Each of these alternatives will be presented to you along with the relevant proforma invoice separately. The price for every item will be exactly calculated, that is why we are famous for being clear in presenting the price and conditions before any implementation, meaning you will sign a contract with all included necessary items with clear prices, and no more money will be received during your payments, except you want to change some parts of the design during the implementation step. So any edit in design will change (increase or decrease) the related prices.
Second step: Roof Insulation:
A prerequisite for implementation of roof garden in portable-modular method
If you haven’t encountered any problems with the insulation of your roof, you will not have any problems with the implementation of Roof Garden by “International Green Check company” and your roof is ready to be delivered to our executive team.
The only important thing left is to cover the roof insulation with a layer of cement sand mortar or mosaic just for the reason that a sharp object may hit the insulation during the implementation process.
Third step: production and transportation of items:
The advantage of the portable-modular system by “International Green Check company” is that a high percentage of the implementation work has already been done in the company’s factory and will be delivered to the implementation project in a prefabricated form.
With our method, the implementation speed reaches its maximum. The items and products are delivered to the project site in a semi-ready form and are implemented on site with the least hassle and the highest speed.
Materials of “Green Check” products:
The material used in “Green Check” products is generally galvanized sheet with furnace powder paint and metal profile, which finally will be finished with a cover of wood plastic composite or thermowood, according to your choice.
Due to the higher durability and more affordable price, we emphasize the use of wood plastic composite (wpc). This material is actually a composite consisting of wood shavings combined with plastic, it is worth mentioning that wood plastic material is completely compatible with the environment.
Green Check Company is proud to introduce you its exclusive wood plastic composite production line.
In the production of wpc by of Green Check Company, no trees are cut and no plastic is produced, and the raw materials used for the production of wpc are totally from recycled materials.
Fourth step: implementation of structures:
After the products and raw materials are delivered to the project site, the structures are implemented at site for example, gazebos, pergola, atrium and the customized flower boxes. Then, the flooring (decking) process starts and in the next stage, the arrangement of ready items, and installation of artificial grass will be applied. And finally, sand and decorative stones are placed in the designated place according to the agreed design.
Fifth step: Suitable planting plan for the roof garden:
The importance of the planting plan in a very sensitive subject specially on top of a roof and while the plants are exposed to the direct sunlight.
Strong wind, hot sun, extreme heat in summer and extreme coldness in winter and high temperature-difference between night and day are all conditions that can be very dangerous and even fatal for plants. For this reason, choosing the right plant for the roof garden and vertical green spaces in general is a challenging and specialized matter.
“International Green Check company” with more than 12 years of experience in the field of green architecture is with you in every step and is proud to be your companion and consultant at the matter.
Fifth step: Suitable planting plan for the roof garden:
The importance of the planting plan in a very sensitive subject specially on top of a roof and while the plants are exposed to the direct sunlight.
Strong wind, hot sun, extreme heat in summer and extreme coldness in winter and high temperature-difference between night and day are all conditions that can be very dangerous and even fatal for plants. For this reason, choosing the right plant for the roof garden and vertical green spaces in general is a challenging and specialized matter.
“International Green Check company” with more than 12 years of experience in the field of green architecture is with you in every step and is proud to be your companion and consultant at the matter.
